how to install your banner between two posts

Many business owners purchase a banner without giving much thought to how the banner will be installed. A quick and inexpensive way to install freestanding banner is to purchase two "green fence posts", drive them into the ground and string your banner between them. When banners are initially installed in this manner, they look fine until they are exposed to wind.  Once the banner wind loads, the pressure on the banner causes the posts to pull inward and then the banner is no longer tensioned between the posts.  The banner will sag in the middle making your message difficult to read.  If your banner remains loose for even as little as a day in windy conditions, the banner will quickly start to tatter due to the constant flapping in the wind.  

GoBigBanners.com as developed The Banner Bar to solve this problem.  The Banner Bar prevents the posts from collapsing inward so your banner will remain tight.  The flexibility of the included bungees will provide enough "give" for the banner to absorb reasonably windy conditions.  If your banner will be installed for an extended amount of time, you will need to periodically check the condition of the bungees as they may become weathered or torn.  Replace your bungees with new as needed.

What lengths are available?

• Banner Bar Sizes: 102", 83" and 54" 

What sizes of banners can be used with The Banner Bar?

• Supported Banner Widths: 96", 72" and 48"

What type of posts will work with The Banner Bar?

• Designed to work with TP133 Posts or 1-5/8" round fence posts (Posts not included)

What if you need to install a banner that is wider than 8'?

• Multiple Banner Bars can be used for installations requiring three or more fence posts.  

What other configurations can The Banner Bar be used for?

• The Banner Bar can also be used to Install two banners in a "V" configuration 

---